Heat-transfer Machine(2-CUTTER-4-roller Equipped with)

Origin	Korea
Model Number	SHHT-5312AF
Brand Name	TERRA

Process :

1st Molding cutter (lower-side) → 2nd Molding cutter (upper-side) →Roll-paper Sanding → 1st adhesive (upper-side) → 2nd adhesive, adhesive strengthening (lower-side) → 3rd adhesive adhesive strengthening (upper-side) → 4th adhesive (lower-side) → Grooving (horizontal angle)

• Dimensions (L x W x H) : 5200 x 1000 x 1500
• Feed speed : 8M/min : 5.5m/min
• Temperature (Heat transcription : Contact the vendor, depending on the transfer-tape)
• Mainly motor : 3.75kw
• Capacitive (220V~380V, 3-phase) : 16 kw
• Recommended Pneumatic : 7kg/cm2
• Molding Cut - motor : 3kw High-frequency motor.
• Pannel length : 100mm~2,400mm
• Pannel width : 50mm~2,400mm
• Overhang : 30mm
• Pannel Thickness : 9~50mm
• Operating the device : Switch Type

1. 2-cutter 4-roller heat-transfer machines once or twice, optionally coated with heat-trans operation and a variety of tasks you can guess the color and good scratch, and durability far
2. Depending on the thickness of the automatic settings (12 ~ 50T), so it is easy for beginners to use
3. Sink, OA furniture, interior and widely used in the field of operations far faster rate.
4. The easy manipulation of the machine, the device is very easy to control of each
5. Cutting work with the process of high-speed motor is very good, clean, adhesive tape
6. Roll-paper sanding unit that is completely closely attached to the optionally available (patent application) Wheel-sanding unit and roll-paper sanding unit attached to the optionally available
7. Products to complete the double task of scratching and durability that far, so good